炼油技术与工程 ›› 2023, Vol. 53 ›› Issue (12): 34-37.
刘武1, 黄左坚2, 路文辉1
Liu Wu1, Huang Zuojian2, Lu Wenhui1
摘要:
对于石油化工立式容器基础短柱的竖向钢筋设计,国内常用的设计方法和国外规范(包括美国标准和欧盟标准)的设计计算方法不尽相同。通过对比美国两个相关标准的要求,结合国内其他行业标准规范中有关大体积钢筋混凝土构件最小配筋率的折减方法,提出了建议:在进行塔基础短柱竖向钢筋的设计计算时,增加螺栓传力的验算;圆环式塔基础短柱竖向钢筋最小配筋率取0.4%;对于大尺寸圆柱式塔基础的短柱竖向钢筋最小配筋率,建议扣除中心部分混凝土后按照圆环式基础短柱考虑;对于直径在2 000~6 500 mm的短柱,配筋ϕ18 mm、ϕ20 mm,间距200 mm,可以满足要求。