加氢裂化脱硫化氢汽提塔操作优化研究

炼油技术与工程 ›› 2021, Vol. 51 ›› Issue (8): 23-27.

加氢裂化脱硫化氢汽提塔操作优化研究

黄海鹏

中国石油化工股份有限公司茂名分公司,广东省茂名市 525000

收稿日期:2021-05-06 出版日期:2021-08-15 发布日期:2021-11-15
作者简介:黄海鹏,高级工程师,工学硕士,主要从事石化企业节能降碳方面的工作。联系电话:13828680781, E-mail:32649163@qq.com。

Operation optimization of hydrogen sulfide removal stripper in hydrocracking unit

Huang Haipeng

SINOPEC Maoming Petrochemical Company, Maoming, Guangdong 525000

Received:2021-05-06 Online:2021-08-15 Published:2021-11-15

摘要/Abstract

摘要： 基于加氢裂化装置实际运行数据,应用模拟软件Aspen Plus,构建脱硫化氢汽提塔模拟流程,借助热力学决策专家系统,选用ELECNRTL对低分油脱硫化氢过程进行模拟分析与操作优化。分别考察汽提蒸汽消耗量、冷低分油进料温度、进料位置以及热低分油进料位置等关键参数对汽提塔脱硫效果和能耗的影响。脱硫化氢汽提塔模拟优化结果表明,现有操作工况下汽提蒸汽过量,用能不合理。配合热低分油进料位置调整,汽提蒸汽量从3.5 t/h降至1.5 t/h,同时,结合装置换热网络综合分析,遵循高热高用和能量梯级利用原则,提出冷低分油预热流程的改进优化措施,通过高温位热量的合理利用,有效提高装置总体用能效率。

关键词: 加氢裂化, 脱硫化氢汽提塔, 冷低分油, 热低分油, 蒸汽耗量, 进料温度, 进料位置

Abstract: Based on the operation data of the hydrocracking unit, the simulation process of hydrogen sulfide removal stripper is constructed by Aspen Plus software, and ELECNRTL is used to simulate and optimize the process of hydrogen sulfide removal of oil from low pressure separator. The effects of key parameters, such as stripping steam consumption, feed temperature and feed position of oil from cold low pressure separator, feed position of oil from hot low pressure separator, on hydrogen sulfide removal efficiency and energy consumption of stripper are investigated. The results show that under the existing operating conditions, the stripping steam is excessive, and the energy consumption is unreasonable. With the adjustment of feed position of oil from hot low pressure separator, the stripping steam consumption reduces from 3.5 t/h to 1.5 t/h. Combined with the comprehensive analysis of the heat exchange network of the unit, following the principles of high heat high utilization and energy cascading utilization, the improvement and optimization measures for the preheating process of oil from cold low pressure separator are put forward. Through the rational use of high temperature potential heat, the overall energy efficiency of the unit is effectively improved.

Key words: hydrocracking, hydrogen sulfide removal stripper, oil from cold low pressure separator, oil from hot low pressure separator, steam consumption, feed temperature, feed position

黄海鹏. 加氢裂化脱硫化氢汽提塔操作优化研究[J]. 炼油技术与工程, 2021, 51(8): 23-27.

Huang Haipeng. Operation optimization of hydrogen sulfide removal stripper in hydrocracking unit[J]. Petroleum Refinery Engineering, 2021, 51(8): 23-27.

[1]	陈光 . 加氢裂化装置原料轻质化对反应过程影响研究[J]. 炼油技术与工程, 2024, 54(6): 18-21.
[2]	严钧, 侯庆贺, 施印冕 . 沸腾床渣油加氢裂化装置结焦情况分析与操作优化[J]. 炼油技术与工程, 2024, 54(1): 10-13.
[3]	范思强, 王仲义, 孙士可, 曹正凯, 崔哲, 羡策. 直馏柴油最大量生产重石脑油两段加氢裂化技术研究[J]. 炼油技术与工程, 2023, 53(5): 33-37.
[4]	代恩东, 许绍东, 刘亭亭, 魏文, 毛玲娟, 高伟, 李伟龙 . 炼油厂重芳烃油加工路线优化[J]. 炼油技术与工程, 2023, 53(10): 7-11.
[5]	罗重春 . 加氢裂化装置生产5号工业白油技术总结[J]. 炼油技术与工程, 2022, 52(9): 8-11.
[6]	张骏驰, 严建林, 司群猛 . LNG冷能在轻烃深冷分离过程综合利用探讨[J]. 炼油技术与工程, 2022, 52(9): 22-27.
[7]	张强, 赵建炜, 姜玉娜, 庄肃青. 增产化工原料的重油加工方案研究[J]. 炼油技术与工程, 2022, 52(6): 4-9.
[8]	洪波. 某大型炼化企业降低柴汽比措施探索与实践[J]. 炼油技术与工程, 2022, 52(6): 1-4.
[9]	黄茂生, 高杭, 秦波, 柳伟, 曹正凯. 加氢裂化催化剂FC-80B研制与应用总结[J]. 炼油技术与工程, 2022, 52(5): 48-50.
[10]	陈玉晶, 于政敏, 樊宏飞, 孙晓艳, 刘昶. 高干点原料多产中间馏分油加氢裂化催化剂研制[J]. 炼油技术与工程, 2022, 52(4): 50-55.
[11]	高杭, 秦波, 柳伟, 薛景航. 新一代轻油型加氢裂化催化剂的研制[J]. 炼油技术与工程, 2022, 52(3): 43-46.
[12]	赵哲甫. 加氢裂化装置生产特供3号喷气燃料总结[J]. 炼油技术与工程, 2022, 52(2): 17-20.
[13]	范思强, 乔楠森, 王涛, 孙立权, 刘德伟, 曹正凯. 加氢裂化技术助力石化产业炼化一体化[J]. 炼油技术与工程, 2022, 52(2): 7-12.
[14]	刘红磊 . 直馏柴油加氢裂化装置生产运行和工艺优化[J]. 炼油技术与工程, 2022, 52(12): 21-25.
[15]	吴章柱, 吴乙博, 鲁维轩, 蓝玉达 . 3.5 Mt/a重油催化裂化装置低主风量工况能量回收系统优化[J]. 炼油技术与工程, 2022, 52(12): 54-57.