摘要:
对催化裂化(FCC)装置再生烟气在三级旋风分离器(三旋)入口及出口的粉尘浓度进行了分析,结合FCC装置新鲜剂、再生器平衡剂、三旋细粉的粒径分布,对比分析了3套FCC装置再生器一级、二级、三级旋风分离器分离效率对烟气粉尘浓度的影响。结果表明:当烟气轮机入口(即三旋出口)烟气中粉尘浓度超过设计要求时,特别是粉尘中粒径大于10μm的颗粒体积占比超过5%时,大颗粒粉尘浓度越高对烟气轮机运行的影响越大,容易出现烟气轮机振动值升高等问题。因此,建议控制再生烟气在全流程的粉尘浓度:在三旋入口的质量浓度不大于600 mg/m3;在三旋出口的质量浓度不大于150 mg/m3,其中粒径大于10μm的颗粒体积占比不大于5%。