摘要: 通过喷嘴雾化试验与模拟数值的交叉验证,分析了喉管式喷嘴的内部流动情况和雾化情况,建立了适用的模拟模型。结果表明:在试验和模拟条件下,喷嘴出口雾滴呈扇形喷出,分布较均匀;喷嘴出口雾滴粒径呈单峰分布,索达尔平均粒径模拟结果(67.2 μm)与试验结果(78.0 μm)的偏差为-13.8%,平均速度模拟结果(55.1 m/s)与试验结果(49.3 m/s)的偏差为11.8%,模型准确性较高。模拟研究发现:液相在预混室发生一次雾化,在喉管处发生二次雾化,经喷嘴出口喷出,粒径减小至67.2 μm。该结果为喉管式喷嘴的结构优化、改进设计提供了依据。